英文字典中文字典


英文字典中文字典51ZiDian.com



中文字典辞典   英文字典 a   b   c   d   e   f   g   h   i   j   k   l   m   n   o   p   q   r   s   t   u   v   w   x   y   z       







请输入英文单字，中文词皆可：

starveling    
n. 挨饿者
a. 挨饿的,贫穷的

挨饿者挨饿的,贫穷的

安装中文字典英文字典查询工具!


中文字典英文字典工具:
选择颜色:
输入中英文单字

































































英文字典中文字典相关资料:


  • Green Dot for 9mm, 38 Spl, and . 357 Mag | The High Road
    Green Dot is a relatively fast powder somewhere between Bullseye and Unique Use it where you would use other fast powders, mostly for light and medium power target loads I generally load lead bullets with Green Dot in 9mm with 125gr small ball Missouri bullets, 38 spl 158gr SWC and 148gr WC, and 45 ACP 200 gr LSWC's It works fine with plated bullets using the same loads
  • New to me powder: Green Dot | The High Road
    i use greendot in my 45 colt casting out of a lyman mold part number 454190 this mold drops a 250gr lead bullet and with 6 8grs greendot and using WW lead this shoots very tight groups out of my rossi 92 leveraction with 16in barrel and my cimarron arms 45 colt pistol with 5 5in barrel! great load for the grand ol'e 45 colt!!
  • Best powder(s) for 7. 62x39 - The High Road
    Getting ready to work up my first loads in 7 62x39 I have Hornady 130 SP bullets ( 308) and have in my inventory H4227, H322, H335 I can find load data for those powders, I was just wondering if anyone has loaded for this caliber and found a powder that worked well The reason I am working
  • Looking for 45 Colt pet load. | Page 3 | The High Road
    I must be the only one who uses greendot? as I load 6 8gr greendot with a 457 dia cast bullet lubed with lee alox and its super accurate!! What would make a 457 diameter bullet a good idea?
  • Ultra Accurate . 45 loads with Blue Dot | The High Road
    I cast a 250gr bullet out of a old single cavity mold lyman part# 454 190 and I lube it with lee alox and size with a lee sizer die to 457 then I relube then again with the lee alox and after they dry I load these with 6 8gr greendot and both my heritage big bore revolvers and my two rossi 92's love this load it is super accurate! so if you ever get some greendot give this a try!! the 45 colt
  • Got me a nickel Colt Cobra | The High Road
    Snatched up this little gem recently ;) The finish was a bit dull, but some Flitz and plenty of elbow grease took care of that! The Cobra is basically a Detective Special with an aluminum frame :cool: With some 158gr LSWC hollowpoints it should be a handy little tool
  • 45 colt and the lyman 452423•••? | The High Road
    For 95% of 45Colt usage, the Colt SAA loads are adequate I use a LOT of either 6 0 RedDot, 7 2gr of GreenDot, 7 8gr of 231, or 8 5gr Unique Mostly because these are the loads that will maintain case obturation with Magtech brass (thinnest I have ) in my 24”bbl WinM94, so cases don’t get sooty and gas blow back into my face
  • 45 Colt Ruger Trailboss loads | The High Road
    Hi All, I'm about to start loading some 45 Colt with Trailboss and am finding the load data from Hodgdon to be a real PITA With a 200 grn RNFP bullet, the max data I can find on the Hodgdon reloading site is "6 5 grns = 855 FPS at 11,000 psi" Great, but what if I want to load hotter than
  • 45 colt and using hp-38 250gr lead bullets please share your data
    so guys i am loading 380 and today got some hp-38 and i noticed some info on using hp-38 in 45 colt and i load and shoot this grand old cartridge and normally i use 6 8gr greendot and cast a 250gr lead bullet out of my lyman single cavity 454190 so having never tried this anyone else use hp-38
  • Winchester Model 94 Trapper - need help! | The High Road
    I disassembled my rifle several weeks ago in order to install a large loop lever I'd purchased Everything went well until I attempted to reassemble, that's when I discovered that somehow I must've boogered up the hole threads for the carrier screw because it wouldn't tighten I tried and tried





中文字典-英文字典  2005-2009