Received BPDU with inconsistent peer vlan id 2 on Port-channel3 VLAN4 The switches are not rebooting or having links that change status before the appearing of the log "Received BPDU with inconsistent peer vlan id 2 on Port-channel3 VLAN4" so I'm at a point that thinking about something else is becoming difficult
Inconsistent peer vlan Problem in Switches - Cisco Community Inconsistent peer vlan SW0 1 -3650#sh spanning-tree summary Switch is in pvst mode Root bridge for: VLAN0001, VLAN0010-VLAN0011 SW01-3650#sh run int g1 0 23 Building configuration Current configuration : 89 bytes ! interface GigabitEthernet1 0 23 description SW02 switchport mode trunk end ----- SW0 2 -3750X#sh spanning-tree summary Switch
Inconsistent Peer VLAN ID - Cisco Community I'm having some trouble trying to figure out why I'm getting the following errors in my logs This morning, for the first time in over a year, my switch stopped communicating with my core switch, so I checked the log Feb 27 16:25:15 364 UTC: %SPANTREE-2-RECV_PVID_ERR: Received BPDU with inconsi
%SPANTREE-2-BLOCK_PVID_PEER: Blocking Inconsistent peer vlan Hello Comunity! Spanning Tree %SPANTREE-2-BLOCK_PVID_PEER: I know there are a lot of posts about inconsistent peer VLANs being blocked But in my situation, both switches are in the same mode "Switches are in Rapid PvST mode", all VLANs are allowed on the trunks, and both switches have the same VLANs
Inconsistent with persistent configuration 12000 IOS-XR Error: configuration is inconsistent with persistent configuration No Error: changes to this SDR's active software will be allowed until the Error: 'clear configuration inconsistency' command is run within the SDR Warning: SDR Owner: Rolling back any configuration changes made as part of the Warning: install operation
Portchannel flapping due to VLAN ID inconsistency Number of inconsistent ports (segments) in the system : 2 Considering this, however, note that Marius reported many peer inconsistent PVIDs being complained about to a single local inconsistent PVID of 1